bing tracking image

Mazda 3 Roof Basket Installation And Review Videos

     

Rhino Rack Roof Basket Review - 2012 Mazda 3- Video

Rhino Rack  Roof Basket Review - 2012 Mazda 3

Today on our 2012 Mazda 3, we're doing a test fit of the Rhino rack roof-matic cargo basket. That part number is RMCB. This is 47 inches long by 35 inches wide and has 165 pound weight capacity. You do want to check your vehicles owners manual to make sure your roof can with stand that much weight, you'll go with the lesser of the two. We already have 3 of our 4 mounts secured down. To start off we've put our plastic bracket in between our carrier and our crossbar. more


Watch Video

11/18/2016 8:14:29 AM



Yakima LoadWarrior Roof Cargo Basket Review - 2013 Mazda 3- Video

Yakima LoadWarrior Roof Cargo Basket Review - 2013 Mazda 3

Today on our 2013, Mazda3. We'll be test fitting the Yakuma Load Warrior. A roof rack cargo basket, part number Y07070. With our Yakuma control tower Roof rack already assembled on our vehicle, we'll begin our test fit by placing our cargo basket directly under the load bars. We don't want to lose in the cylinder knot, and allow the T bolt to come out of the slot. This will free our clamps to bring them around our bars. Once we have all of our clamps surround our bars, we would want to reinsert the bulb into the appropriate side, and tighten down the cylinder knot. more


Watch Video

3/18/2014 5:18:51 PM



Thule MOAB Roof Top Cargo Basket Review - 2013 Mazda 3- Video

Thule MOAB Roof Top Cargo Basket Review - 2013 Mazda 3

Today on our 2013 Mazda 3 we'll be test fitting the Thule Moab Roof Top Cargo Carrier, The Mother of All Baskets, part number th690xt. To begin our test fit we'll place our carrier directly on top of our load bars. Once we have it centered with our vehicle we can then bring our clamps around each load bar, feed the bolt through the clamp and tighten with a wing nut.We'll repeat the same process for the other three clamps to finish securing our carrier to our roof rack. Once we have everything tightened down and secured we can install our covers for each clamping station. Now that our carrier is installed we're ready to start loading up some accessories. That completes today's test fit of the Thule Moab Roof Top Cargo Carrier, part number th690xt on our 2013 Mazda 3.. more


Watch Video

5/28/2013 12:44:41 PM



  1